View MDA970G107_4675667.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

VOLTAGE RANGE 50 to 1000 Volts CURRENT 4.0 Amperes
FEATURES
* * * *
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER
MDA970G1 THRU MDA970G10
Ideal for printed circuit board Surge overload rating: 150 amperes peak Mounting position: Any Weight: 4.8 grams
MECHANICAL DATA
* UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O
sco Di
ed tinu n
RS-4L
.768 (19.5) .728 (18.5) .580 (14.7) .540 (13.7)
DISCONTINUED-
"This series is replaced by the RS40XL series that meets to the same fit and function parameters. The RS40XL series is preferred for PCB assembly."
AC
.640 (16.3) .600 (15.2)
DIA.
.052 (1.3) .048 (1.2)
.750 (19.0) MIN.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
.083 (2.1)
.220 (5.6) .180 (4.6) .256 (6.5) .236 (6.0)
Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 50 o C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 1) Typical Junction Capacitance (Note 3) Operating and Storage Temperature Range
O
SYMBOL VRRM VRMS VDC IO I FSM R q JC R q JA CJ T J, T STG
MDA970G1
MDA970G2 MDA970G3 MDA970G5 MDA970G6 MDA970G8 MDA970G10
UNITS Volts Volts Volts Amps Amps
0
50 35 50
100 70 100
200 140 200
400 280 400 4.0 150 10 28 40 -55 to + 150
600 420 600
800 560 800
1000 700 1000
C/ W pF
0
C
ELECTRICAL CHARACTERISTICS (@TA=25 C unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 6.28A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C @T A = 100 o C SYMBOL VF IR
MDA970G1 MDA970G2 MDA970G3 MDA970G5 MDA970G6 MDA970G8 MDA970G10
UNITS Volts mAmps 2007-5
1.1 5.0 100
NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. "Fully ROHS compliant", "100% Sn plating (Pb-free)". 3. Measureed at 1MHz and applied reverse voltage of 4.0 volts.
RATING AND CHARACTERISTICS CURVES ( MDA970G1 THRU MDA970G10 )
4.0 AVERAGE FORWARD CURRENT, (A) 3.2 2.4 1.6 0.8 0
Single Phase Half Wave 60 Hz Inductive or Resistive Load
INSTANTANEOUS FORWARD CURRENT, (A)
40 10 4
1 0.4
T A = 25 OC Pulse Width = 300mS 1% Duty Cycle
0
50
100
O
150
0.1
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
AMBIENT TEMPERATURE, ( C)
INSTANTANEOUS FORWARD VOLTAGE, (V)
INSTANTANEOUS REVERSE CURRENT, (mA)
PEAK FORWARD SURGE CURRENT, (A)
1000
FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE
180 150 120 90 60 30 0 1
FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
8.3mS Single Half Sine-Wave JEDEC Method
100
TA = 100 OC
10
TA = 25 OC
1.0
0.1
0
20
40
60
80
100
120
140
2
5
10
20
50
100
PERCENT RATED PEAK REVERSE VOLTAGE, (%)
NUMBER OF CYCLES AT 60Hz
FIG.3 TYPICAL REVERSE CHARACTERISTICS
FIG.4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.

▲Up To Search▲

Price & Availability of MDA970G107

	To Download MDA970G107 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .